In SS7 Pro
I'm trying to set two variables to two product database values. Here's the
code. The varibles are not initialized to anything prior to these two lines
(these lines are line 49 & 50 in the template)
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- VAR.MSRP PRODUCT.Price --]
When I publish the product I get the following errors
Indexing Product [93:test Product 00]...
Indexing Product [1080:1/4" G4 Hot-Galvanized Chain]...
Indexing Product [89:Test Product #2]...
Indexing Product [92:Test Product 0]...
Indexing Product [93:test Product 00]...
Indexing Product [91:Test Product Number Four]...
Indexing Product [16:Test Product One]...
Indexing Product [90:Test Product Three]...
Cleaning Environment
Closing All files
End of Partial Reindex.
Generating Page [95:Test Page]...
Adding Product [test Product 00]...
AC_Product [49]: Template Error: Product tag not allowed
AC_Product [50]: Template Error: Product tag not allowed
AC_Product [59]: Template Error: Product tag not allowed
Errors trying to set a VAR to the value of PRODUCT.Price & P
7 posts
• Page 1 of 1
Errors trying to set a VAR to the value of PRODUCT.Price & P
by Vince Salese » Wed Mar 03, 2004 10:12 am
- Vince Salese
Re: Errors trying to set a VAR to the value of PRODUCT.Price
by loren_d_c » Wed Mar 03, 2004 10:37 am
Is it the product template that you are setting those VAR's up in, or
are you doing it in the LOOP PRODUCTS in the page template? The
PRODUCT.* tags are not valid in a page template.
-Loren
Vince Salese wrote:
are you doing it in the LOOP PRODUCTS in the page template? The
PRODUCT.* tags are not valid in a page template.
-Loren
Vince Salese wrote:
In SS7 Pro
I'm trying to set two variables to two product database values. Here's the
code. The varibles are not initialized to anything prior to these two lines
(these lines are line 49 & 50 in the template)
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- VAR.MSRP PRODUCT.Price --]
When I publish the product I get the following errors
Indexing Product [93:test Product 00]...
Indexing Product [1080:1/4" G4 Hot-Galvanized Chain]...
Indexing Product [89:Test Product #2]...
Indexing Product [92:Test Product 0]...
Indexing Product [93:test Product 00]...
Indexing Product [91:Test Product Number Four]...
Indexing Product [16:Test Product One]...
Indexing Product [90:Test Product Three]...
Cleaning Environment
Closing All files
End of Partial Reindex.
Generating Page [95:Test Page]...
Adding Product [test Product 00]...
AC_Product [49]: Template Error: Product tag not allowed
AC_Product [50]: Template Error: Product tag not allowed
AC_Product [59]: Template Error: Product tag not allowed
- loren_d_c
- Posts: 2571
- Joined: Fri Aug 04, 2006 12:02 pm
- Location: Anywhere
Re: Errors trying to set a VAR to the value of PRODUCT.Price
by Vince Salese » Wed Mar 03, 2004 10:40 am
It is in the Define Subproducts section of a Product Template
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c251kb$epo$1@support.shopsite.com...
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c251kb$epo$1@support.shopsite.com...
Is it the product template that you are setting those VAR's up in, or
are you doing it in the LOOP PRODUCTS in the page template? The
PRODUCT.* tags are not valid in a page template.
-Loren
Vince Salese wrote:
In SS7 Pro
I'm trying to set two variables to two product database values. Here's
the
code. The varibles are not initialized to anything prior to these two
lines
(these lines are line 49 & 50 in the template)
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- VAR.MSRP PRODUCT.Price --]
When I publish the product I get the following errors
Indexing Product [93:test Product 00]...
Indexing Product [1080:1/4" G4 Hot-Galvanized Chain]...
Indexing Product [89:Test Product #2]...
Indexing Product [92:Test Product 0]...
Indexing Product [93:test Product 00]...
Indexing Product [91:Test Product Number Four]...
Indexing Product [16:Test Product One]...
Indexing Product [90:Test Product Three]...
Cleaning Environment
Closing All files
End of Partial Reindex.
Generating Page [95:Test Page]...
Adding Product [test Product 00]...
AC_Product [49]: Template Error: Product tag not allowed
AC_Product [50]: Template Error: Product tag not allowed
AC_Product [59]: Template Error: Product tag not allowed
- Vince Salese
Re: Errors trying to set a VAR to the value of PRODUCT.Price
by loren_d_c » Wed Mar 03, 2004 1:39 pm
What is the template code from the beginning [-- DEFINE SUBPRODUCT --]
to the [-- END_DEFINE SUBPRODUCT --], and are those two tags on their
own lines and is this definition at the beginning of the file before the
other sections?
-Loren
Vince Salese wrote:
to the [-- END_DEFINE SUBPRODUCT --], and are those two tags on their
own lines and is this definition at the beginning of the file before the
other sections?
-Loren
Vince Salese wrote:
It is in the Define Subproducts section of a Product Template
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c251kb$epo$1@support.shopsite.com...
Is it the product template that you are setting those VAR's up in, or
are you doing it in the LOOP PRODUCTS in the page template? The
PRODUCT.* tags are not valid in a page template.
-Loren
Vince Salese wrote:
In SS7 Pro
I'm trying to set two variables to two product database values. Here's
the
code. The varibles are not initialized to anything prior to these two
lines
(these lines are line 49 & 50 in the template)
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- VAR.MSRP PRODUCT.Price --]
When I publish the product I get the following errors
Indexing Product [93:test Product 00]...
Indexing Product [1080:1/4" G4 Hot-Galvanized Chain]...
Indexing Product [89:Test Product #2]...
Indexing Product [92:Test Product 0]...
Indexing Product [93:test Product 00]...
Indexing Product [91:Test Product Number Four]...
Indexing Product [16:Test Product One]...
Indexing Product [90:Test Product Three]...
Cleaning Environment
Closing All files
End of Partial Reindex.
Generating Page [95:Test Page]...
Adding Product [test Product 00]...
AC_Product [49]: Template Error: Product tag not allowed
AC_Product [50]: Template Error: Product tag not allowed
AC_Product [59]: Template Error: Product tag not allowed
- loren_d_c
- Posts: 2571
- Joined: Fri Aug 04, 2006 12:02 pm
- Location: Anywhere
Re: Errors trying to set a VAR to the value of PRODUCT.Price
by Vince Salese » Thu Mar 04, 2004 7:29 am
Hi Loren,
Here's the code from the first line in the template to the end of the define
subproduct. Also note that I have to put an additional <body> tag for the
link colors even though I have the page settings set to #0000FF on the page
template. For some reason they just don't seem to take.
All I'm trying to accomplish here is to place the List/MSRP and the Sale
price in the correct column depending on the settings. I've since recoded to
not use the VAR but would still like to know why it didn't work.
Best
Vince
<body vlink="#0000FF" alink="#0000FF">
############################################################################
##################################################################
[-- DEFINE SUBPRODUCT --]
### Set a bunch of variables ###
[-- VAR.TableLayout no --]
[-- VAR.Options no --]
[-- VAR.Quantity no --]
[-- VAR.Graphic no --]
[-- VAR.DisplayMSRP yes --]
[-- VAR.DisplayACPrice yes --]
##################
#Add Product Name
##################
<td align="left" width="300" >
[-- IF PRODUCT.DisplayName --]
[-- PRODUCT.NameSize Begin --][-- PRODUCT.NameStyle Begin --]
[-- IF PRODUCT.DisplayMoreInformationPage--]
<a href="[-- PRODUCT.MoreInfoURL --]">[-- PRODUCT.Name --]</a>
[-- ELSE --]
[-- PRODUCT.Name --]
[-- END_IF --]
[-- PRODUCT.NameStyle End --][-- PRODUCT.NameSize End --]
[-- END_IF --]
</td>
#################
#Add Product SKU
#################
<td align="left" width="100" nowrap><font size="2" >
[-- IF PRODUCT.DisplaySKU--]
[--PRODUCT.SKU--]
[-- END_IF --]
</font></td>
##########################
#Add Price and Sale Price
##########################
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice no --]
[-- IF PRODUCT.DisplayPrice --]
[-- IF PRODUCT.Price --]
[-- IF PRODUCT.SaleOn --]
[-- IF PRODUCT.SaleAmount --]
[-- VAR.DisplayMSRP yes --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.MSRP PRODUCT.Price --]
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- ELSE --]
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- END_IF --]
[-- ELSE --]
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.ACPrice PRODUCT.Price --]
[-- END_IF --]
[-- END_IF --]
[--END_IF --]
<td align="right" width="125" >
[-- IF VAR.DisplayMSRP yes --]
<font size="2">[-- VAR.MSRP --]</font>
[-- END_IF --]
</td>
<td align="right" width="125" >
[-- IF VAR.DisplayACPrice yes --]
<font size="2" color="#FF0000"><b>[-- VAR.ACPrice --]</b></font>
[-- END_IF --]
</td>
##########################
#Begin Shopping Cart Form
##########################
[-- IF PRODUCT.DisplayPrice --]
<form action="[-- SHOPPING_CART_URL BASE --]/order.cgi" method=post>
<input type=hidden name=storeid value=[-- STORE_ID --]>
<input type=hidden name=dbname value=products>
<input type=hidden name=function value=add>
<input type=hidden name=itemnum value=[-- PRODUCT.RecordNumber --]>
##########################
#Add any Ordering Options
##########################
<td align="right">
#if Ordering Options are required, generate the quantity box
[-- IF PRODUCT.DisplayOrderingOptions --]
[-- IF PRODUCT.OptionText --]
[-- PRODUCT.OptionText --]
[-- END_IF --]
[-- ORDER_OPTION_MENU LINE --]
[-- END_IF --]
</td>
##################################
#Add the Quantity Box if required
##################################
<td align="right">
[-- IF PRODUCT.DisplayOrderQuantity --]
Qty <input type=text size=2 name="[-- PRODUCT.RecordNumber --]:qnty"
value="1" >
[-- END_IF --]
</td>
############################
#Add the ADD To Cart Button
############################
<td align="right">
[-- IF VAR.AddButtonGraphic --]
<input type=image class="add" src="[-- OUTPUT_DIRECTORY_URL --]/[--
VAR.Media --]/[-- VAR.AddButtonGraphic --]"name="Add to Cart" alt="Add to
Cart">
[-- ELSE_IF ADDIMAGE? --]
<input type=image [--ADDIMAGE--]>
[-- ELSE --]
<input class="add" type=submit value="[-- ADDTEXT --]">
[-- END_IF --]
</td>
########################
#End Shopping Cart Form
########################
</form>
[-- END_IF --]
#############################
[-- END_DEFINE SUBPRODUCT --]
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c25c9o$h2c$1@support.shopsite.com...
Here's the code from the first line in the template to the end of the define
subproduct. Also note that I have to put an additional <body> tag for the
link colors even though I have the page settings set to #0000FF on the page
template. For some reason they just don't seem to take.
All I'm trying to accomplish here is to place the List/MSRP and the Sale
price in the correct column depending on the settings. I've since recoded to
not use the VAR but would still like to know why it didn't work.
Best
Vince
<body vlink="#0000FF" alink="#0000FF">
############################################################################
##################################################################
[-- DEFINE SUBPRODUCT --]
### Set a bunch of variables ###
[-- VAR.TableLayout no --]
[-- VAR.Options no --]
[-- VAR.Quantity no --]
[-- VAR.Graphic no --]
[-- VAR.DisplayMSRP yes --]
[-- VAR.DisplayACPrice yes --]
##################
#Add Product Name
##################
<td align="left" width="300" >
[-- IF PRODUCT.DisplayName --]
[-- PRODUCT.NameSize Begin --][-- PRODUCT.NameStyle Begin --]
[-- IF PRODUCT.DisplayMoreInformationPage--]
<a href="[-- PRODUCT.MoreInfoURL --]">[-- PRODUCT.Name --]</a>
[-- ELSE --]
[-- PRODUCT.Name --]
[-- END_IF --]
[-- PRODUCT.NameStyle End --][-- PRODUCT.NameSize End --]
[-- END_IF --]
</td>
#################
#Add Product SKU
#################
<td align="left" width="100" nowrap><font size="2" >
[-- IF PRODUCT.DisplaySKU--]
[--PRODUCT.SKU--]
[-- END_IF --]
</font></td>
##########################
#Add Price and Sale Price
##########################
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice no --]
[-- IF PRODUCT.DisplayPrice --]
[-- IF PRODUCT.Price --]
[-- IF PRODUCT.SaleOn --]
[-- IF PRODUCT.SaleAmount --]
[-- VAR.DisplayMSRP yes --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.MSRP PRODUCT.Price --]
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- ELSE --]
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- END_IF --]
[-- ELSE --]
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.ACPrice PRODUCT.Price --]
[-- END_IF --]
[-- END_IF --]
[--END_IF --]
<td align="right" width="125" >
[-- IF VAR.DisplayMSRP yes --]
<font size="2">[-- VAR.MSRP --]</font>
[-- END_IF --]
</td>
<td align="right" width="125" >
[-- IF VAR.DisplayACPrice yes --]
<font size="2" color="#FF0000"><b>[-- VAR.ACPrice --]</b></font>
[-- END_IF --]
</td>
##########################
#Begin Shopping Cart Form
##########################
[-- IF PRODUCT.DisplayPrice --]
<form action="[-- SHOPPING_CART_URL BASE --]/order.cgi" method=post>
<input type=hidden name=storeid value=[-- STORE_ID --]>
<input type=hidden name=dbname value=products>
<input type=hidden name=function value=add>
<input type=hidden name=itemnum value=[-- PRODUCT.RecordNumber --]>
##########################
#Add any Ordering Options
##########################
<td align="right">
#if Ordering Options are required, generate the quantity box
[-- IF PRODUCT.DisplayOrderingOptions --]
[-- IF PRODUCT.OptionText --]
[-- PRODUCT.OptionText --]
[-- END_IF --]
[-- ORDER_OPTION_MENU LINE --]
[-- END_IF --]
</td>
##################################
#Add the Quantity Box if required
##################################
<td align="right">
[-- IF PRODUCT.DisplayOrderQuantity --]
Qty <input type=text size=2 name="[-- PRODUCT.RecordNumber --]:qnty"
value="1" >
[-- END_IF --]
</td>
############################
#Add the ADD To Cart Button
############################
<td align="right">
[-- IF VAR.AddButtonGraphic --]
<input type=image class="add" src="[-- OUTPUT_DIRECTORY_URL --]/[--
VAR.Media --]/[-- VAR.AddButtonGraphic --]"name="Add to Cart" alt="Add to
Cart">
[-- ELSE_IF ADDIMAGE? --]
<input type=image [--ADDIMAGE--]>
[-- ELSE --]
<input class="add" type=submit value="[-- ADDTEXT --]">
[-- END_IF --]
</td>
########################
#End Shopping Cart Form
########################
</form>
[-- END_IF --]
#############################
[-- END_DEFINE SUBPRODUCT --]
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c25c9o$h2c$1@support.shopsite.com...
What is the template code from the beginning [-- DEFINE SUBPRODUCT --]
to the [-- END_DEFINE SUBPRODUCT --], and are those two tags on their
own lines and is this definition at the beginning of the file before the
other sections?
-Loren
Vince Salese wrote:
It is in the Define Subproducts section of a Product Template
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c251kb$epo$1@support.shopsite.com...
Is it the product template that you are setting those VAR's up in, or
are you doing it in the LOOP PRODUCTS in the page template? The
PRODUCT.* tags are not valid in a page template.
-Loren
Vince Salese wrote:
In SS7 Pro
I'm trying to set two variables to two product database values. Here's
the
code. The varibles are not initialized to anything prior to these two
lines
(these lines are line 49 & 50 in the template)
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- VAR.MSRP PRODUCT.Price --]
When I publish the product I get the following errors
Indexing Product [93:test Product 00]...
Indexing Product [1080:1/4" G4 Hot-Galvanized Chain]...
Indexing Product [89:Test Product #2]...
Indexing Product [92:Test Product 0]...
Indexing Product [93:test Product 00]...
Indexing Product [91:Test Product Number Four]...
Indexing Product [16:Test Product One]...
Indexing Product [90:Test Product Three]...
Cleaning Environment
Closing All files
End of Partial Reindex.
Generating Page [95:Test Page]...
Adding Product [test Product 00]...
AC_Product [49]: Template Error: Product tag not allowed
AC_Product [50]: Template Error: Product tag not allowed
AC_Product [59]: Template Error: Product tag not allowed
- Vince Salese
Re: Errors trying to set a VAR to the value of PRODUCT.Price
by loren_d_c » Thu Mar 04, 2004 9:07 am
I put that exact code into a product template and used it on a product
with (and tried it without) subproducts, with no errors. How are you
getting the template code to the server, are you editing it in ShopSite,
or are you editing it in a text editor then uploading it through
ShopSite or through FTP?
-Loren
Vince Salese wrote:
with (and tried it without) subproducts, with no errors. How are you
getting the template code to the server, are you editing it in ShopSite,
or are you editing it in a text editor then uploading it through
ShopSite or through FTP?
-Loren
Vince Salese wrote:
Hi Loren,
Here's the code from the first line in the template to the end of the define
subproduct. Also note that I have to put an additional <body> tag for the
link colors even though I have the page settings set to #0000FF on the page
template. For some reason they just don't seem to take.
All I'm trying to accomplish here is to place the List/MSRP and the Sale
price in the correct column depending on the settings. I've since recoded to
not use the VAR but would still like to know why it didn't work.
Best
Vince
body vlink="#0000FF" alink="#0000FF"
############################################################################
##################################################################
[-- DEFINE SUBPRODUCT --]
### Set a bunch of variables ###
[-- VAR.TableLayout no --]
[-- VAR.Options no --]
[-- VAR.Quantity no --]
[-- VAR.Graphic no --]
[-- VAR.DisplayMSRP yes --]
[-- VAR.DisplayACPrice yes --]
##################
#Add Product Name
##################
td align="left" width="300"
[-- IF PRODUCT.DisplayName --]
[-- PRODUCT.NameSize Begin --][-- PRODUCT.NameStyle Begin --]
[-- IF PRODUCT.DisplayMoreInformationPage--]
a href="[-- PRODUCT.MoreInfoURL --]">[-- PRODUCT.Name --]</a
[-- ELSE --]
[-- PRODUCT.Name --]
[-- END_IF --]
[-- PRODUCT.NameStyle End --][-- PRODUCT.NameSize End --]
[-- END_IF --]
/td
#################
#Add Product SKU
#################
td align="left" width="100" nowrap><font size="2"
[-- IF PRODUCT.DisplaySKU--]
[--PRODUCT.SKU--]
[-- END_IF --]
/font></td
##########################
#Add Price and Sale Price
##########################
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice no --]
[-- IF PRODUCT.DisplayPrice --]
[-- IF PRODUCT.Price --]
[-- IF PRODUCT.SaleOn --]
[-- IF PRODUCT.SaleAmount --]
[-- VAR.DisplayMSRP yes --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.MSRP PRODUCT.Price --]
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- ELSE --]
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- END_IF --]
[-- ELSE --]
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.ACPrice PRODUCT.Price --]
[-- END_IF --]
[-- END_IF --]
[--END_IF --]
td align="right" width="125"
[-- IF VAR.DisplayMSRP yes --]
font size="2">[-- VAR.MSRP --]</font
[-- END_IF --]
/td
td align="right" width="125"
[-- IF VAR.DisplayACPrice yes --]
font size="2" color="#FF0000"><b>[-- VAR.ACPrice --]</b></font
[-- END_IF --]
/td
##########################
#Begin Shopping Cart Form
##########################
[-- IF PRODUCT.DisplayPrice --]
form action="[-- SHOPPING_CART_URL BASE --]/order.cgi" method=post
input type=hidden name=storeid value=[-- STORE_ID --]
input type=hidden name=dbname value=products
input type=hidden name=function value=add
input type=hidden name=itemnum value=[-- PRODUCT.RecordNumber --]
##########################
#Add any Ordering Options
##########################
td align="right"
#if Ordering Options are required, generate the quantity box
[-- IF PRODUCT.DisplayOrderingOptions --]
[-- IF PRODUCT.OptionText --]
[-- PRODUCT.OptionText --]
[-- END_IF --]
[-- ORDER_OPTION_MENU LINE --]
[-- END_IF --]
/td
##################################
#Add the Quantity Box if required
##################################
td align="right"
[-- IF PRODUCT.DisplayOrderQuantity --]
Qty <input type=text size=2 name="[-- PRODUCT.RecordNumber --]:qnty"
value="1" >
[-- END_IF --]
/td
############################
#Add the ADD To Cart Button
############################
td align="right"
[-- IF VAR.AddButtonGraphic --]
input type=image class="add" src="[-- OUTPUT_DIRECTORY_URL --]/[--
VAR.Media --]/[-- VAR.AddButtonGraphic --]"name="Add to Cart" alt="Add to
Cart"
[-- ELSE_IF ADDIMAGE? --]
input type=image [--ADDIMAGE--]
[-- ELSE --]
input class="add" type=submit value="[-- ADDTEXT --]"
[-- END_IF --]
/td
########################
#End Shopping Cart Form
########################
/form
[-- END_IF --]
#############################
[-- END_DEFINE SUBPRODUCT --]
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c25c9o$h2c$1@support.shopsite.com...
What is the template code from the beginning [-- DEFINE SUBPRODUCT --]
to the [-- END_DEFINE SUBPRODUCT --], and are those two tags on their
own lines and is this definition at the beginning of the file before the
other sections?
-Loren
Vince Salese wrote:
It is in the Define Subproducts section of a Product Template
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c251kb$epo$1@support.shopsite.com...
Is it the product template that you are setting those VAR's up in, or
are you doing it in the LOOP PRODUCTS in the page template? The
PRODUCT.* tags are not valid in a page template.
-Loren
Vince Salese wrote:
In SS7 Pro
I'm trying to set two variables to two product database values. Here's
the
code. The varibles are not initialized to anything prior to these two
lines
(these lines are line 49 & 50 in the template)
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- VAR.MSRP PRODUCT.Price --]
When I publish the product I get the following errors
Indexing Product [93:test Product 00]...
Indexing Product [1080:1/4" G4 Hot-Galvanized Chain]...
Indexing Product [89:Test Product #2]...
Indexing Product [92:Test Product 0]...
Indexing Product [93:test Product 00]...
Indexing Product [91:Test Product Number Four]...
Indexing Product [16:Test Product One]...
Indexing Product [90:Test Product Three]...
Cleaning Environment
Closing All files
End of Partial Reindex.
Generating Page [95:Test Page]...
Adding Product [test Product 00]...
AC_Product [49]: Template Error: Product tag not allowed
AC_Product [50]: Template Error: Product tag not allowed
AC_Product [59]: Template Error: Product tag not allowed
- loren_d_c
- Posts: 2571
- Joined: Fri Aug 04, 2006 12:02 pm
- Location: Anywhere
Re: Errors trying to set a VAR to the value of PRODUCT.Price
by Vince Salese » Sat Mar 06, 2004 11:39 am
I open a new page in Frontpage, go to the HTML screen, remove any default
html code then copy the code from the SS template and paste it to Frontpage
then cut and paste it back to the SS template once I've made the changes.
Basically using Frontpage as a text editor. Probably not a good idea? I'll
try using notepad and see what happens.
Vince
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c27go0$455$1@support.shopsite.com...
html code then copy the code from the SS template and paste it to Frontpage
then cut and paste it back to the SS template once I've made the changes.
Basically using Frontpage as a text editor. Probably not a good idea? I'll
try using notepad and see what happens.
Vince
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c27go0$455$1@support.shopsite.com...
I put that exact code into a product template and used it on a product
with (and tried it without) subproducts, with no errors. How are you
getting the template code to the server, are you editing it in ShopSite,
or are you editing it in a text editor then uploading it through
ShopSite or through FTP?
-Loren
Vince Salese wrote:
Hi Loren,
Here's the code from the first line in the template to the end of the
define
subproduct. Also note that I have to put an additional <body> tag for
the
link colors even though I have the page settings set to #0000FF on the
page
template. For some reason they just don't seem to take.
All I'm trying to accomplish here is to place the List/MSRP and the Sale
price in the correct column depending on the settings. I've since
recoded to
not use the VAR but would still like to know why it didn't work.
Best
Vince
body vlink="#0000FF" alink="#0000FF"
############################################################################
##################################################################
[-- DEFINE SUBPRODUCT --]
### Set a bunch of variables ###
[-- VAR.TableLayout no --]
[-- VAR.Options no --]
[-- VAR.Quantity no --]
[-- VAR.Graphic no --]
[-- VAR.DisplayMSRP yes --]
[-- VAR.DisplayACPrice yes --]
##################
#Add Product Name
##################
td align="left" width="300"
[-- IF PRODUCT.DisplayName --]
[-- PRODUCT.NameSize Begin --][-- PRODUCT.NameStyle Begin --]
[-- IF PRODUCT.DisplayMoreInformationPage--]
a href="[-- PRODUCT.MoreInfoURL --]">[-- PRODUCT.Name --]</a
[-- ELSE --]
[-- PRODUCT.Name --]
[-- END_IF --]
[-- PRODUCT.NameStyle End --][-- PRODUCT.NameSize End --]
[-- END_IF --]
/td
#################
#Add Product SKU
#################
td align="left" width="100" nowrap><font size="2"
[-- IF PRODUCT.DisplaySKU--]
[--PRODUCT.SKU--]
[-- END_IF --]
/font></td
##########################
#Add Price and Sale Price
##########################
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice no --]
[-- IF PRODUCT.DisplayPrice --]
[-- IF PRODUCT.Price --]
[-- IF PRODUCT.SaleOn --]
[-- IF PRODUCT.SaleAmount --]
[-- VAR.DisplayMSRP yes --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.MSRP PRODUCT.Price --]
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- ELSE --]
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- END_IF --]
[-- ELSE --]
[-- VAR.DisplayMSRP no --]
[-- VAR.DisplayACPrice yes --]
[-- VAR.ACPrice PRODUCT.Price --]
[-- END_IF --]
[-- END_IF --]
[--END_IF --]
td align="right" width="125"
[-- IF VAR.DisplayMSRP yes --]
font size="2">[-- VAR.MSRP --]</font
[-- END_IF --]
/td
td align="right" width="125"
[-- IF VAR.DisplayACPrice yes --]
font size="2" color="#FF0000"><b>[-- VAR.ACPrice --]</b></font
[-- END_IF --]
/td
##########################
#Begin Shopping Cart Form
##########################
[-- IF PRODUCT.DisplayPrice --]
form action="[-- SHOPPING_CART_URL BASE --]/order.cgi" method=post
input type=hidden name=storeid value=[-- STORE_ID --]
input type=hidden name=dbname value=products
input type=hidden name=function value=add
input type=hidden name=itemnum value=[-- PRODUCT.RecordNumber --]
##########################
#Add any Ordering Options
##########################
td align="right"
#if Ordering Options are required, generate the quantity box
[-- IF PRODUCT.DisplayOrderingOptions --]
[-- IF PRODUCT.OptionText --]
[-- PRODUCT.OptionText --]
[-- END_IF --]
[-- ORDER_OPTION_MENU LINE --]
[-- END_IF --]
/td
##################################
#Add the Quantity Box if required
##################################
td align="right"
[-- IF PRODUCT.DisplayOrderQuantity --]
Qty <input type=text size=2 name="[--
PRODUCT.RecordNumber --]:qnty"
value="1" >
[-- END_IF --]
/td
############################
#Add the ADD To Cart Button
############################
td align="right"
[-- IF VAR.AddButtonGraphic --]
input type=image class="add" src="[--
OUTPUT_DIRECTORY_URL --]/[--
VAR.Media --]/[-- VAR.AddButtonGraphic --]"name="Add to Cart" alt="Add
to
Cart"
[-- ELSE_IF ADDIMAGE? --]
input type=image [--ADDIMAGE--]
[-- ELSE --]
input class="add" type=submit value="[-- ADDTEXT --]"
[-- END_IF --]
/td
########################
#End Shopping Cart Form
########################
/form
[-- END_IF --]
#############################
[-- END_DEFINE SUBPRODUCT --]
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c25c9o$h2c$1@support.shopsite.com...
What is the template code from the beginning [-- DEFINE SUBPRODUCT --]
to the [-- END_DEFINE SUBPRODUCT --], and are those two tags on their
own lines and is this definition at the beginning of the file before the
other sections?
-Loren
Vince Salese wrote:
It is in the Define Subproducts section of a Product Template
"Loren" <loren_d_c@yahoo.com> wrote in message
news:c251kb$epo$1@support.shopsite.com...
Is it the product template that you are setting those VAR's up in, or
are you doing it in the LOOP PRODUCTS in the page template? The
PRODUCT.* tags are not valid in a page template.
-Loren
Vince Salese wrote:
In SS7 Pro
I'm trying to set two variables to two product database values.
Here's
the
code. The varibles are not initialized to anything prior to these two
lines
(these lines are line 49 & 50 in the template)
[-- VAR.ACPrice PRODUCT.SaleAmount --]
[-- VAR.MSRP PRODUCT.Price --]
When I publish the product I get the following errors
Indexing Product [93:test Product 00]...
Indexing Product [1080:1/4" G4 Hot-Galvanized Chain]...
Indexing Product [89:Test Product #2]...
Indexing Product [92:Test Product 0]...
Indexing Product [93:test Product 00]...
Indexing Product [91:Test Product Number Four]...
Indexing Product [16:Test Product One]...
Indexing Product [90:Test Product Three]...
Cleaning Environment
Closing All files
End of Partial Reindex.
Generating Page [95:Test Page]...
Adding Product [test Product 00]...
AC_Product [49]: Template Error: Product tag not allowed
AC_Product [50]: Template Error: Product tag not allowed
AC_Product [59]: Template Error: Product tag not allowed
- Vince Salese
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 17 guests