ShopSite Forums

We've been using db upload for years now. About 10 days ago we upgraded to v
7.0.3 and tonight for the first time we uploaded a few new products to our
current total of around 2600.
The products would not display on the designated page ("In These Pages")
after db upload. We had to go into Products>Power Edit>In These Pages, and
check off the relevant page manually before it would display.
We thought it may be the new pagination "page" default of zero, but it is
disabled (under Publish). Perhaps this is the problem but we've played with
it a bit without success. As a side note how does one turn on Pagination.
The help link on the Publish page links to "New Features in shopsite 7.0"
without telling you how to actually turn it on.
Please comment, this is a critical issue for us. We tried a few different
things but nothing appears to work but perhaps it's something obvious.
Richard

We've been using db upload for years now. About 10 days ago we upgraded to v
7.0.3 and tonight for the first time we uploaded a few new products to our
current total of around 2600.
The products would not display on the designated page ("In These Pages")
after db upload. We had to go into Products>Power Edit>In These Pages, and
check off the relevant page manually before it would display.
We thought it may be the new pagination "page" default of zero, but it is
disabled (under Publish). Perhaps this is the problem but we've played with
it a bit without success. As a side note how does one turn on Pagination.
The help link on the Publish page links to "New Features in shopsite 7.0"
without telling you how to actually turn it on.
Please comment, this is a critical issue for us. We tried a few different
things but nothing appears to work but perhaps it's something obvious.
Richard

Richard,

On the Edit Page layout screen there is a field at the bottom of the
screen called Pagination. Enter the number of products you want
displayed on the page in that field. On the Utilities > Publish page
you can set the maximum number of pages to generate. Each page will
have the number of product defined in the Pagination section of the Edit
Page Layout screen. If there are more product than will fit on the
maximum number of pages defined the last page will have all remaining
products. For example if you have 101 product and assign 10 per page
and have a maximum of 10 pages the final page would have 11 products.
If you are using custom templates you include the [-- PrevNext --] tag
where you want the links to the various pages to be placed.

Jim

Richard Ruda wrote:
We've been using db upload for years now. About 10 days ago we upgraded
to v
7.0.3 and tonight for the first time we uploaded a few new products to
our
current total of around 2600.
The products would not display on the designated page ("In These Pages")
after db upload. We had to go into Products>Power Edit>In These Pages,
and
check off the relevant page manually before it would display.
We thought it may be the new pagination "page" default of zero, but it
is
disabled (under Publish). Perhaps this is the problem but we've played
with
it a bit without success. As a side note how does one turn on
Pagination.
The help link on the Publish page links to "New Features in shopsite
7.0"
without telling you how to actually turn it on.
Please comment, this is a critical issue for us. We tried a few
different
things but nothing appears to work but perhaps it's something obvious.
Richard

Hi Jim,
Thanks for the responses
Upload Issue - We upgraded from one of the latest Version 6's. I can't
remember exactly which release of 6 it was but I can find out from our ISP.
I guess we've been doing DB upload for so long that we did check for the
quotes issue as a potential problem but this particular DB is in Access. We
also went into the back office to compare the relevant products field "In
these Pages" and compared it to the "Name" value in the page. They are
identical as they are built from the same source..
I guess we could back up the DB and do a Regenerate. Other than that we are
stumped. Any other suggestions please

Re Pagination - we have built our own pagination system and I guess we were
only messing with it to see if it was related to our upload issue. To test
we took an existing random page (with only one product on it already) and
changed it from 0 to 30 (and other amounts). We then went into
Utilities>Publish but the max. number of pages is still grayed out (with 10
as the default).
a) Is pagination enabled only when more products are assigned to the page
(over and above the value set for the actual page?). b) Also more important,
if Max number of pages on the publish page is disabled we trust that
shopsite will work as in prior versions, (V6.x and below)?
c) We don't see it listed under page upload fields but surely Pagination
needs to be a defined DB upload field?

Thank you very much for the responses Jim

"Jim" <jstavast@xmission.com> wrote in message
news:c0an6n$uqa$1@support.shopsite.com...

Richard,

On the Edit Page layout screen there is a field at the bottom of the
screen called Pagination. Enter the number of products you want
displayed on the page in that field. On the Utilities > Publish page
you can set the maximum number of pages to generate. Each page will
have the number of product defined in the Pagination section of the Edit
Page Layout screen. If there are more product than will fit on the
maximum number of pages defined the last page will have all remaining
products. For example if you have 101 product and assign 10 per page
and have a maximum of 10 pages the final page would have 11 products.
If you are using custom templates you include the [-- PrevNext --] tag
where you want the links to the various pages to be placed.

Jim

Richard Ruda wrote:

We've been using db upload for years now. About 10 days ago we upgraded

to v

7.0.3 and tonight for the first time we uploaded a few new products to

our

current total of around 2600.
The products would not display on the designated page ("In These Pages")
after db upload. We had to go into Products>Power Edit>In These Pages,

and

check off the relevant page manually before it would display.
We thought it may be the new pagination "page" default of zero, but it

is

disabled (under Publish). Perhaps this is the problem but we've played

with

it a bit without success. As a side note how does one turn on

Pagination.

The help link on the Publish page links to "New Features in shopsite

7.0"

without telling you how to actually turn it on.
Please comment, this is a critical issue for us. We tried a few

different

things but nothing appears to work but perhaps it's something obvious.
Richard

Jim,
A) DB Upload - we somehow fixed it. For the record and for others.
1) We backed up our DB
2) We did an entire regeneration - finished normally.
3) To test further (prior to adding new products/pages) we deleted from the
back office a very old Product and its relevant Page (it could not possibly
be corrupted)
4) We uploaded via DB upload the relevant DB with that old product (pages
first, then products) and noted all results reports (all as expected)
5) The product was added to the page correctly.
6) We then added new products/pages and as expected these also were OK.
I suspect that 2) did the trick....

B) Pagination
Yes you are correct, YourHost did upgrade us but did not turn on the
features. My question is; once 7.x features are enabled, how do we ignore
pagination? If the default is 0 (which it looks like it is) for each page
will this retain our current layout?
Thanks
Richard