Shipping Configuration

[Metz]

Hi,
I'm extremely new to Shopsite and am trying to set up the following shipping rules for a friend.

$ 0 - 30 = 8.35
$30 - 60 = 9.20
$60 - 1000 = 15%
$1000 - 3000 = 11%
$10000 and up = 8%

It appears (and from everything I've read), I can't use percentages in the shipping calculation and there is only one handling charge area.

Any suggestions?

Thanks much!

[Jim]

There is no way to use a percentage so the best solution would be to break up your large ranges into smaller ones with a $ amount for the smaller sections. So break up the 60 - 1000 in to a couple of smaller ranges say 60 -200 and set a price for that and 200-500 and set a price for that etc.

Also note that you must specify values out to at least 2 decimal points and have the ending and starting values not be the same. I.E. if you have 0-30 and 30 -60 ranges they would need to be 0.00-29.99 and 30.00-59.99 or 0.00-30.00 and 30.01-60.00

[Metz]

Thanks for your input! I had a feeling that the percentages were going to pose a problem.